• Mon - Sat 9.00 – 17.00
  • +44(0) 77 837 25020

Shop

Sale!

FORD Mustang (US) Tire Pressure BAND Sensor Bypass TPMS System Dash Light Reset Emulator

Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)

$80.00 $75.00

TPMS BYPASS – Tire Pressure Monitoring System Sensors Emulator
Lifelong solution to the annoying dash light indicator
Bypass any Tyres With or Without TPMS Sensors

+ -

Product Description

Annoying TPMS Light on a Dashboard because Tire Sensor(s) just failed?
Do you want to mount new summer/winter wheels without TPMS sensors?
Garage or Dealer are overcharging for TPMS sensors and labour?

 

Introducing NEW TPMS Bypass – Tire Pressure Monitoring System/Sensors Emulator

The device we sell is a very simple and a lifelong solution to the annoying dash light indicator. It’s designed by our engineers and manufactured according to the highest standards. Ideal for any tyres winter/summer with or without TPMS sensors. TPMS Bypass consists of a small box which can be discreetly placed anywhere within the vehicle.

  • Requires 2 x AA batteries only!
  • Connects by wireless signal!
  • Ideal for Winter and Summer tires!
  • No need to replace faulty TPMS sensors!
  • No need to take your car to the garage or dealer!
  • Bypass all wheels with or without TPMS Sensors!
  • Detailed Programming Instructions Included!

With step by step instructions supplied our TPMS Bypass will take less than 10 min to connect and BYPASS TPMS SYSTEM/SENSORS in the vehicle and you’re ready to GO!
What is excellent that our TPMS box works by a wireless signal and not a hard wiring and once our box is removed from the vehicle TPMS system reverts back to it’s original preset. Our product is also suitable for vehicle Annual Tests such as MOT, NCT or any other.


 

Fits US FORD variants with BAND/LEAR TPMS Sensors 

MUSTANG   2007 – 2009

 

Package Contents:
  • 1 x TPMS – Tire Pressure Monitoring System BYPASS (batteries not included)
  • 1 x Detailed Programming Instructions

 

Compatibility Pre-Check!

To make sure that it fits your vehicle please follow this pre-check procedure!

Vehicles with a PUSH BUTTON ignition start, please follow the steps below.
1. With vehicle off, press and release the brake pedal.
2. Press, and hold, the START button until chime sounds.
3. Power off by pushing the button 1 time.
4. Press, and hold, the START button until chime sounds.
5. Power off by pushing the button 1 time.
6. Press, and hold, the START button until chime sounds.
7. Press and release the brake pedal.
8. Power OFF by pushing the button 1 time.
9. Press, and hold, the START button until chime sounds.
10. Power OFF by pushing the button 1 time.
11. Press, and hold, the START button until chime sounds.
12. Power off by pushing the button 1 time.
13. Press, and hold, the START button until chime sounds.
The car horn should sound once meaning that your car is compatible with our device!

Vehicles with an IGNITION KEY, please follow the steps below.
1. Place the key in the ignition in the off position (do not turn the key)
2. Place foot on the brake for 2 seconds and remove
3. Turn the ignition key to the second position so that the dash lights are illuminated. Do not start the engine.
4. Return the key to the off position.
5. Turn the ignition key to the second position so that the dash lights are illuminated. Do not start the engine.
6. Return the key to the off position.
7. Turn the ignition key to the second position so that the dash lights are illuminated. Do not start the engine.
8. Place foot on the brake for 2 seconds and remove.
9. Return the key to the off position.
10. Turn the ignition key to the second position so that the dash lights are illuminated. Do not start the engine.
11. Return the key to the off position.
12. Turn the ignition key to the second position so that the dash lights are illuminated. Do not start the engine.
13. Return the key to the off position
14. Turn the ignition key to the second position so that the dash lights are illuminated. Do not start the engine.
The car horn should sound once meaning that your car is compatible with our device!

 

Tyre Pressure Monitoring Systems
An increasing number of vehicle makes and models are fitted with tyre pressure monitoring systems (or TPMS for short) and most new vehicles manufactured since 2012(EU) and 2005(US) have TPMS integrated as standard. A sensor valve in each tyre monitors tyre pressures and reports low pressures or tyre pressure imbalances to the driver via the dashboard display.

Battery exhaustion a looming issue with TPMS sensor units
One of the most common TPMS sensor issues is batteries failing within the pressure sensors. These batteries cannot be replaced. Typically the batteries will start to decline rapidly after 5 years of operation. It is also important to note that when one TPMS battery fails the rest of the TPMS valve fitted to the vehicle will soon also fail, as all the batteries have been fitted to the sensors about the same time. TPMS sensor stems can also become corroded over time as they are open to the elements and take on everything the road as to throws at them.

Did You Know?
A faulty TPMS sensor can now result in an immediate MOT/NCT or any other Vehicle test failure. As of 1st January 2015 any car in UK manufactured from 2012 onwards that is displaying a TPMS warning light on the dashboard will automatically fail its MOT test. Car dealers want you to bring your car to them to replace the TPMS sensors. Depending on your dealership, expect to spend between £120-£210/$150-$250 PER WHEEL to have them replaced and coded to the OBD (on board diagnostics). Our TPMS device is designed to Bypass such problem for a fraction of a cost! No need to take your car to the dealer/garage with step by step instructions supplied our TPMS Bypass will take less than 10 min to connect and BYPASS TPMS SYSTEM/SENSORS in the vehicle and you’re ready to GO!

You Are the Best Tire Pressure Monitoring System
Rely on TPMS to warn you only of a puncture or an active air leak. It’s your responsibility as a driver to check your tire pressures monthly, or at least have them checked by someone else. On new cars, the automaker’s recommended pressure is on a placard on the driver’s doorjamb. On older cars, it can be on the trunk lid. It is not on the tire.

Additional Information

Weight 0.05 kg
Dimensions 6.8 x 6.4 x 2 cm
  1. Rated 5 out of 5

    gerry_hannon (verified owner)

    08 Mustang GT with aftermarket rims and tires which TPMS won’t work on. You know the routine… Annoying error message and beep and dash light when you just turn the key on, and again when you start, and the whole time you are driving the yellow light stays on. Really irritating especially at night. I admit I was skeptical this tire pressure band sensor emulator would solve my problem. Followed the procedure and it totally works. Like, I don’t write reviews, and was so impressed and relieved to have that irritation gone, I had to come back and share. Awesome product. Thank you

Add a review